™TECH - MEN ELECTRONICS COMPONENTS
™
| ™ |
TECH - MEN ELECTRONICS COMPONENTS |
|
HOME PRODUCT LIST CONTACT US
CARBON FILM
CARBON FILM(FLAME POOF)
METAL FILM METAL OXIDE
 |
STYLE |
DIMENSION (mm) |
|||
L |
D |
d(nominal) |
H ± 3 |
||
CFR12 |
3.2 ± 0.1 | 1.7 ± 0.2 | 0.45 | 30 | |
| CFR25 | 6.5 ± 0.5 | 2.3 ± 0.3 | 0.60 | 30 | |
| CFR33 | 9.0 ± 0.5 | 3.0 ± 0.5 | 0.65 | 30 | |
| CFR100 | 12.0 ± 1 | 4.0 ± 0.5 | 0.8 ± 0.05 | 34 | |
| CFR200 | 16.0 ± 1 | 5.0 ± 0.1 | 0.8 ± 0.05 | 34 | |
 |
STYLE |
DIMENSION (mm) |
|||||||
| W | P | L1-L2 | T | Zmax | emax | tmax | Smax | ||
| CFR12 (T52) | 52 ± 1 | 5±0.3 | 1max |
6.0 ± 0.5 |
0.8 | 0.5 | 2.5 | 0.5 | |
| CFR25 (T52) | |||||||||
| CFR33 (T52) | |||||||||
| CFR12 (T26) | 26±1 0 |
5±0.3 | 0.2max | 6.0 ± 0.5 |
0.8 | 0.1 | 2.5 | 0.5 | |
| CFR25 (T26) | |||||||||
| CFR100 (T63) | 63±1.5 |
5±0.5 |
1.0 | 6.0 ± 0.5 |
1.2 | 0.5 | 2.5 | 0.8 | |
| CFR200 (T63) | |||||||||
| STYLE | POWER RATING | MAX WORKING V. | MAX OVERLOAD V. | RATING AMBIENT TEMP | RESISTANCE RANGE | |
| G | J | |||||
CFR12 |
0.16W | 250V | 400V | 70°C | 10 Ohm ~ 1M Ohm |
10 Ohm ~ 1M Ohm |
| CFR25 | 0.25W | 300V | 600V | |||
| CFR33 | 0.5W | 400V | 800V | |||
| CFR100 | 1W | 500V | 1000V | |||
| CFR200 | 2W | 700V | 1500V | |||
| REQUIRMENTS | CHARACTERISTICS | TEST METHOD | ||||||
| JIS C5202 | MIL-R-22684 | |||||||
| Operation Temp. Range | -55°C ~ 155°C |
- | - | |||||
| Temp. Coefficient (ppm/°C) | Type / T.C.R. | +350~450 | 0~700 | 0 ~ -1000 |
0 ~ -1300 | 5 ` 2 | 416 ` 11 | |
| CFR12 | Under 47K Ohm | 51K Ohm ~ 100K Ohm |
110K Ohm |
Over 360K Ohm |
||||
CFR25 & Over |
Under 100K Ohm |
110KOhm ~ 1M Ohm |
1.1 M Ohm ~ 2.2M Ohm |
Over |
||||
| Nosie (uv/v) | Type / Nosie | 0.1 | 0.3 | 0.6 | 1.0 | 5.91 Quan Tech Model 2136 Resistor Nosie Test Set. | ||
| CFR12 | - | Under 10 Ohm | 11K Ohm ~ 100K Ohm |
Over 110K Ohm | ||||
| CFR25 & Over | Under 10K Ohm | 11K Ohm ~ 510K Ohm |
560K Ohm ~ 2.2 M Ohm |
Over 2.4M Ohm | ||||
| Dielectric Withstanding Voltage | No Evidence of Flashover, Breakdown | Resistance body : M.O.V. 5 Sec. V Block Part of lead insulated, 100V 5 Sec. | ||||||
| Resistance to Solvents | The resistor shall withstand solvents test in accordance with Article MIL-STD-202E-215 without producing the mechanical orelectrical demage. | |||||||
 |
Short Time Overload | ± (1% + 0.05 Ohm) | 5.5A | 4.6.5 | ||||
| Resistance to Soldering Heat | ± (1% + 0.05 Ohm) | 6.4 350°C 3 Sec. | 4.6.9 | |||||
| Temperature Cycling | ± (0.5% + 0.05 Ohm) | 7.4 -55°C/ 85°C | 4.6.3 | |||||
| Vibration | ± (0.5% + 0.05 Ohm) | 6.33A | 4.6.14 | |||||
| Moisture Resistance | Under 100K Ohm ±3% and over 100K Ohm ±5% | 40°C 90-95% 7.9 1000Hr | 4.6.10 | |||||
| Load Life | Under 100K Ohm ± (2% + 0.05 Ohm)
and over 100K Ohm ±3% |
7.10 70°C 1000Hr | 4.6.12 | |||||
CARBON FILM RESISTORS (FLAME PROOF)
| STYLE | DIMENSION (mm) | |||
L |
D |
d(nominal) |
H ± 3 |
|
CFR12 |
3.2 ± 0.1 | 1.7 ± 0.2 | 0.45 | 30 |
| CFR25 | 6.5 ± 0.5 | 2.3 ± 0.3 | 0.60 | 30 |
| CFR33 | 9.0 ± 0.5 | 3.0 ± 0.5 | 0.65 | 30 |
RATING
| STYLE | POWER RATING | MAX WORKING V. | MAX OVERLOAD V. | RATING AMBIENT TEMP. | RESISTANCE RANGE | |
| G | J | |||||
CFR12 |
0.16W | 250V | 400V | 70°C | 10 Ohm ~ 1M Ohm |
10 Ohm ~ 1M Ohm |
| CFR25 | 0.25W | 300V | 600V | 10 Ohm ~ 1M Ohm |
10 Ohm ~ 1M Ohm |
|
| CFR33 | 0.50W | 400V | 800V | 10 Ohm ~ 1M Ohm |
10 Ohm ~ 1M Ohm |
|
CHARACTERISTICS
| REQUIRMENTS | CHARACTERISTICS | TEST METHOD | |
| JIS C 5202 | MIL-R-22684B | ||
| Operating Temp. Range | -55°C ~ 155°C | - | - |
| Insulation Resistance | Over 100² M Ohm | 5.6 -A | 4.6.8 |
| Non-Combustibility | The resistors shall withstand overload test in accordance with Article UL492.2 13 without producing a fire hazard. | ||
| Resistance to Solvents | The resistors shall withstand solvents test in accordance with Article MIL STD 202E.215 without producing the machanical or electrical damage. | ||
 |
STYLE |
DIMENSION (mm) |
|||
L |
D |
d(nominal) |
H ± 3 |
||
MFR12 |
3.2 ± 0.1 | 1.7 ± 0.2 | 0.45 | 30 | |
| MFR25 | 6.5 ± 0.5 | 2.3 ± 0.3 | 0.60 | 30 | |
| MFR33 | 9.0 ± 0.5 | 3.0 ± 0.5 | 0.65 | 30 | |
| MFR100 | 12.0 ± 1 | 4.0 ± 0.5 | 0.8 ± 0.05 | 34 | |
| MFR200 | 16.0 ± 1 | 5.0 ± 0.1 | 0.8 ± 0.05 | 34 | |
RATING
| STYLE | POWER RATING | MAX WORKING V. | MAX OVERLOAD V. | RATING AMBIENT TEMP | RESISTANCE RANGE |
MFR12 |
0.16W | 200V | 400V | 70°C | 10 Ohm ~ 1M Ohm |
| MFR25 | 0.25W | 250V | 500V | ||
| MFR33 | 0.5W | 350V | 700V |
CHARACTERISTICS
| REQUIRMENTS | CHARACTERISTICS | TEST METHOD | |||
| Operating Temp. Range | -55°C ~ 155°C | JIS C 5202 | MIL-R-22684B | ||
Temperature Coefficient of Resistance |
C | K | 5.2A | 4.6.12. | |
| ± 50 | ± 100 | ||||
|
Short Time Overload |
± (0.5% + 0.05 Ohm) |
5.5A |
4.6.6. |
|
Insulated Resistance |
Over 100² M Ohm |
5.6A |
4.6.9. |
||
| Dielectric Withstanding V. | ± (0.5% + 0.05 Ohm) |
5.7A |
4.6.8. |
||
Resistance to Soldering Heat |
± (0.5% + 0.05 Ohm) |
6.4 350°C 3 Sec |
4.6.10. |
||
| Temperature Cycling | ± (0.5% + 0.05 Ohm) |
7.4 |
4.6.4. |
||
| Low Temp. Operation | ± (0.5% + 0.05 Ohm) |
- |
4.6.5. |
||
| Terminal Strength | ± (0.5% + 0.05 Ohm) |
6.1 |
4.6.7. |
||
| Moisture Resistance | ± (1% + 0.05 Ohm) |
7.9 1000 Hr |
|
||
| Load Life | ± (1% + 0.05 Ohm) |
7.10 1000 Hr |
4.6.13. |
||
METAL OXIDE FILM RESISTORS (FLAME PROOF)
| STYLE | DIMENSION (mm) |
|||||
L |
D |
H ± 3 | d(nominal) | P | h | |
MOR100(S) |
9 ± 1.0 | 3 ± 0.5 | 30 | 0.8 | 12.5 | 6 ± 2 |
| MOR200(S) | 11.5 ± 1.0 | 4 ± 0.5 | 15 | 6 ± 2 | ||
| MOR300(S) | 15.5 ± 1.0 | 6 ± 1.0 | 20 | 10 ± 3 | ||
| MOR100(B) | 11.5 ± 1.0 | 4 ± 0.5 | 15 | 6 ± 2 | ||
| MOR200(B) | 15.5 ± 1.0 | 6 ± 1.0 | 20 | 10 ± 3 | ||
RATING
| STYLE | Power Rating | MAX Working V. | MAX Overload V. | Dielectric Withstanding V. | Rating Ambient Temp. | Resistance Range | |
MOR100(S) |
MOR100(B) | 1W | 350V | 600V | 500V | 70°C | 0.2 Ohm ~ 100K Ohm |
| MOR200(S) | MOR200(B) | 2W | 350V | 700V | 500V | 0.2 Ohm ~ 100K Ohm |
|
| MOR300(S) | - | 3W | 350V | 700V | 700V | 0.2 Ohm ~ 100K Ohm |
|
CHARACTERISTICS
| REQUIRMENTS | CHARACTERISTICS | TEST METHOD | ||
| JIS C 5202 | MIL-R-22684B | |||
| Operating Temp. Range | -55°C ~ 155°C | - | - | |
Temperature Coefficient (ppm°C) |
± 300 |
5.2 | 4.6.11 | |
|
Short Time Overload |
± (1% + 0.05 Ohm) | 5.5 -A | 4.6.5 |
Resistance to Soldering Heat |
± (1% + 0.05 Ohm) | 6.4 350°C 3 Sec | 4.6.9 | |
| Temperature Cycling | ± (1% + 0.05 Ohm) | 7.4 -55°C / 85°C | 4.6.3 | |
| Moisture Resistance | ± (5% + 0.1 Ohm) | 7.9 1000 hr | 4.6.10 | |
| Load Life | ± (5% + 0.1 Ohm) | 7.10 1000 hr | 4.6.12 | |
| Dielectric Withstanding V. | ± (0.5% + 0.05 Ohm) | 5.7 -A | 4.6.7 | |
| Insulated Resistance | Over 100² M Ohm | 5.6 -A | 4.6.8 | |
| Non-Combustibility | The resistors shall withstand overload test in accordance with Article UL492.2 13 without producing a fire hazard. |
|||
| Resistance to Solvents | The resistors shall withstand solvents test in accordance with Article MIL STD 202E.215 without producing the machanical or electrical damage. |
|||
